Straw pellet mills use crop straw or sawdust as the main raw material, pressing it into cylindrical pellets. Depending on the quality of the raw material, the pressed pellets can be used as biomass fuel or livestock feed.
Straw pellet mills use crop straw or sawdust as the main raw material, pressing it into cylindrical pellets. Depending on the quality of the raw material, the pressed pellets can be used as biomass fuel or livestock feed. Straw feed pellet mills incorporate the best features of domestic and international pellet mills, making them energy-saving new products. In the past, feed was generally processed into powder before feeding, which had drawbacks such as inconvenience in feeding, poor palatability, selective feeding by livestock, and low utilization rate.
Straw pellet mills are divided into extrusion type and stamping type. Extrusion type straw pellet mills are further divided into flat die straw pellet mills and ring die straw pellet mills. Extrusion type is suitable for making feed pellets, while stamping type is suitable for making fuel.
How to save on fuel pellet costs? Making your own fuel pellets is certainly one effective method, and a straw pellet machine is undoubtedly a good helper for making your own fuel pellets. Many users use straw pellet machines to make fuel pellets. Many farmers are also preparing to use it. The editor from Henan Xrido Biomass Pellet Machine Manufacturer has summarized some usage tips for straw pellet machines, hoping to help those in need.
Pellet Machine Manufacturer Tips: Pay attention to these details when receiving a straw pellet machine
- After receiving the equipment, check for any damage during transportation. Confirm the equipment is intact before taking delivery.
- Different straw pellet machines have different output capacities, and therefore require different voltages. After connecting the power supply, check the rotation direction. If it is reversed, please adjust the wiring.
Straw Pellet Machine Usage
- Add gear oil before use.
- When using the straw pellet machine for the first time, grind it with oil. This oil can be mixed with wheat bran, sawdust, and waste machine oil in a 5:2 ratio.
- Adjust the pressure roller screw evenly until it cannot be turned by hand. Start the machine and check if each pressure roller is rotating and contacting the disc surface. If not, readjust it until it contacts the mold surface. Grind repeatedly with oil, adding a small amount first, and increasing the amount after normal output. Repeat this process for half an hour.
- For fuel pellet processing, the raw materials and water should be mixed evenly. If there is too much raw material and the forming effect is poor, the proportion of raw material should be increased. Feeding can be done manually or by belt conveyor.
- Stop the machine, loosen the pressure roller screws to allow the pressure rollers to be in a free state, and clean out any remaining material. If the machine will not be used for a long time, press oil into the machine to prevent blockage.
Pellet Mill Manufacturer Reminder: Pay Attention to These Details for Long-Term Use of Straw Pellet Mills
- Stones, iron blocks, and screws must not enter the machine. Accidental entry will cause damage.
- When pressing pellets, avoid prolonged idle running of the pressure rollers and grinding disc; keep up with the feed.
- Regularly check the tightness of the screws and whether the pressure roller bearings and main shaft bearings are lacking oil.
- If any abnormal response occurs, immediately stop the machine and check for foreign objects. Clean them thoroughly and then restart the machine.
